DETAILED PARAMETERS

Semiconductor Mini Bar with Foam Door

Descriptions:

1. Remark:

●Note when putting the food:

A. Don't over the shelf range,the interval between the layers and the glass is a cooling path.

B. Don't put food directly in the bottom of the cabinet. It should be placed on the shelf.

C. The maximum load on the shelf is 20kg. The position of the shelf can be adjusted according to the size of the food.

● Freezer in the use of the process, the door is not too frequent to open, in order to minimize the number of open the door, shorten the time to open the door to reduce air leakage.
● If the power cord is damaged, it must be replaced by the service personnel.
● Do not put fingers, sticks, etc. into the fan, otherwise there is a risk of injury.
● Do not hang items on the door, otherwise there is the risk of dumping the freezer and falling the items.
● Do not touch the compressor directly by hand, otherwise there is a risk of scalding.
● freezer surrounded by condensing machine suction, should keep its area clean, to avoid dust flying, affecting the cooling effect.
● When using an environment below 10 ° C, the temperature of the freezer compartment will be low.
2.Freezer should not be used for a long time Note:
A, remove all the items in the cabinet, pull out the power plug.
B, inside and outside the refrigerator should be clean, wipe the cabinet moisture, mold point, and open the door, let it fully dry.
C, can not be placed in children's play, so as to avoid children into the cabinet, dangerous

Photos of Mini Bar:

More Specifications:

Model	Capacity	Voltage	Power	Temp.	Size	Packing Size	△t	Weight
MAB-30A	30L	220V/50Hz	50W	5~15°C	420X400X485MM	470X450X535MM	20°C	8.5/10kg
MAB-30AA	30L	220V/50Hz	50W	5~15°C	420X400X495MM	470X450X535MM	20°C	11.9/13.4kg

Details of Mini Bar:

RECOMMENDED